Mechanical properties and bioactive surface modification via alkali-heat treatment of a porous ti-18Nb-4Sn alloy for biomedical applications

A porous Ti–18 at.%Nb–4 at.%Sn (hereafter, Ti–18Nb–4Sn) alloy was prepared by powder metallurgy. The porous structures were examined by scanning electron microscopy and the phase constituents were analysed by X-ray diffraction. Mechanical properties of the porous alloy were investigated using a compressive test. To enhance the bioactivity of the alloy surface, alkali-heat treatment was used to modify the surface. The bioactivity of the pre-treated alloy sample was investigated using a biomimetic process by soaking the sample into simulated body fluid (SBF). Results indicate that the elastic modulus and plateau stress of the porous Ti–18Nb–4Sn alloy decrease with decreasing relative density. The mechanical properties of the porous alloy can be tailored to match those of human bone. After soaking in SBF for 7 days, a hydroxyapatite layer formed on the surface of the pre-treated porous Ti–18Nb–4Sn alloy. The pre-treated porous Ti–18Nb–4Sn alloy therefore has the potential to be a bioactive implant material.

Preparation of bioactive porous Ti-Sn-Nb alloy for biomedical applications

A porous Ti-16Sn-4Nb alloy with an average pore size of 300 µm and porosity of 60 % was prepared by powder metallurgy, and a bone-like apatite coating was obtained by soaking the samples in a concentrated simulated body fluid (lOx SBF). The changes of the microstructure and composition on the surface with soaking time were investigated by using X-ray diffractometry (XRD), and scanning electron microscopy equipped with energy dispersive spectroscopy (SEM-EDS), The bone-like apatite granules started to deposit throughout the porous Ti alloy foam aner 1 h soaking, and the number of granules increased with the increase of the soaking time. A uniform bone-like apatite layer covered the entire surface of the sample after soaking in Ihe lOx SBF for 6h. The Ti-16Sn-4Nb foam showed a good bioactivity after a thermochemical process and soaking into a 1Ox SBF.

Biomimetic processing of nanocrystallite bioactive apatite coating on titanium-zirconium alloy

In this paper nanocrystallite apatite coating on TiZr substrate was prepared by a biomimetic process. Surface morphology, thickness, crystalline phases a~nd bond strength of the coating were investigated by SEM, XRD and tensIle test, respectively. Results show that the apatite coating exhibIts a nanocrystalIite structure with similar stoichiometry to that of natural bone. The apatite layer becomes thicker with the increasing of the SBF immersion time and is firmly adhered to the substrate with the highest average bond strength of 15.5 MPa. This nanocrystallite apatite coating is expected to bond to surrounding bone tissue directly in vivo after implantation.

Chemiluminescence as a screening tool for bioactive phytochemicals

The health benefits of antioxidant-rich ‘Mediterranean’ type diets high in grain, olives and red wine are well recognised. Since these foodstuffs consist of a complex matrix of chemical components, to date, the primary challenge lies in prioritising and isolating molecules for a physiologically relevant cell culture assay to assess their human health benefits. Currently, the most common approach requires arduous sample fractionation into smaller ‘crude’ extracts, followed by costly cell culture assays, with the bioactive identified only after a positive response in the cell. The work presented within this poster demonstrates the potential for an acidified potassium permanganate chemiluminescence detector as a much simpler screening tool to identify the best bioactive candidates from a complex sample matrix.

Bioactive hydroxyapatite coating on titanium-niobium alloy through a sol-gel process

Hydroxyapatite (HA) was coated on the surface of a titanium-niobium (Ti-Nb) alloy by a sol-gel process. Triethyl phosphite and calcium nitrate were used as the phosphorus (P) and calcium (Ca) precursors respectively to prepare a Ca/P sol solution. The Ti-Nb alloy was dip-coated in the sol and heated at 600°C for 30 minutes. X-ray diffraction (XRD) analysis indicated the major phase constituent of the coating after heat treatment was HA. Scanning electron microscopy (SEM) observation showed that a few cracks were distributed on the HA coating. The in-vitro bioactivity of the HA coated Ti-Nb alloy was assessed using a cell culture of SaOS-2 osteoblast-like cells. The density of cell attachment was determined by MTT assay; the cell morphology was observed by SEM. Results indicated that the density of cell attachment on the surface of the Ti-Nb alloy was significantly increased by HA coating. Cell morphology observation showed that cells attached, spread and grew well on the HA coated surface. It can be concluded that the HA coating improved the in-vitro bioactivity of Ti-Nb alloy effectively.

Preparation of bioactive porous titanium-molybdenum alloy through powder metallurgy

Porous Ti-Mo alloy samples with different porosities from 52% to 72% were successfully fabricated by the space-holder sintering method. The pore size of the porous Ti-Mo alloy samples were ranged from 200 to 500 μm. The plateau stress and elastic modulus of the porous Ti-Mo alloy samples increases with the decreasing of the porosity. Moreover, an apatite coating on the Ti-Mo alloy after an alkali and heat treatment was obtained through soaking into a simulated body fluid (SBF). The porous Ti-Mo alloy provides promising potential for new implant materials with new bone tissue ingrowth ability, bioactivity and mechanical properties mimicking those of natural bone.

Plant bioactive determinations using flow analysis, chromatography with chemiluminescence detection

The development of rapid analytical methodologies for the determination of plant bioactives including antioxidants, amino acids and opium alkaloids was investigated using novel flow analysis and liquid chromatographic techniques. These methodologies were applied to the wine, food and pharmaceutical industries.

Controlled release of bioactive chemicals

This project has been concerned with the development of controlled release formulations of the herbicide atrazine and the pesticide chlorpyrifos. The results of both chemical and biological evaluation show that these controlled release formulations can significantly reduce leaching and therefore ground water pollution of atrazine without losing herbicidal potency in the early stages after application.

Theoretical study on behaviour of superplastic forming/diffusion bonding of bulk metallic glasses

Based on the behaviour of the superplastic deformation of metallic glasses and Pilling’s model, a diffusion bonding model suitable for metallic glasses is proposed in the present study. In the current model, the diffusion bonding processes consists of two stages: one is the plastic deformation stage and the other is the void shrinkage stage, in which, the atom diffusion and superplastic deformation are responsible for the void shrinkage. Applying this model to the diffusion bonding of a Zr based metallic glass, the predicted bonding time is in good agreement with the experimental result. A map for determining the bonding temperature and time to achieve high quality bonding in a Zr based metallic glass is suggested.

The determination of bioactive compounds using HPLC with chemiluminescence detection

This dissertation investigated the selectivity and sensitivity of high performance liquid chromatography with various chemiluminescence detection protocols for the determination of biologically important compounds in beverages, wines and biomedical matrices. The work showed conclusively that this technology could successfully identify wines from different geographic locations and also monitor their maturation.

Will these glasses help? Holocaust videotestimony and the transfer of intangible heritage

An analysis of Erica's videotestimony, presented at the Jewish Holocaust Museum and Research Centre in Melbourne, reveals how audio-visual history can act as a medium for the transfer of cultural heritage, despite claims that the trauma of the Holocaust has destroyed the possibility of any meaningful transmissíon. It is argued that the discussion of personal photographs from before and after the Holocaust forms a key component of the videotestimony and constitutes the primary mechanism for intergenerational transfer of Jewish communal heritage, Transfer is further facilitated by the interviewer whose questioning explicitly encourages Erica to reflect on issues of cultural continuity. Significantly, Erica's answers do not always conform to the interviewer's expectations about Jewish communal and religious identification and this can result in tension between the
two. Here too the photographs play an important role in resolving tension between Erica and the interviewer.